Certified Coating and Corrosion Course Toronto

Course Title Duration Details Register
Paint and Coating Quality Control QC/QA 36 h (6 weeks) Details
Corrosion Engineering 30 h (4 weeks) Details
Coating Technology 30 h (4 weeks) Details
Physics and Chemistry of Paints and Coatings 36 h (6 weeks) Details
Automotive Coatings 18 h (3 weeks) Details
Coating Inspection 30 h (4 weeks) Details
Powder Coatings 18 h (3 weeks) Details
Coating defects and Failure Analysis 12 h (1 week) Details
Surface Preparation and Coating Application 12 h (1 week) Details

Details

Paint and Coating Quality Control QC/QA

Course Content Who will benefit Schedule
  • Physical properties
  • Film tests
  • Optical properties
  • Mechanical properties
  • Environmental resistance
  • Special tests
  • Instrumental analysis
  • Destructive tests
  • Non-destructive tests

The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, engineers and technicians, mechanical, civil and chemical engineers.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter

Date Feb.27 Apr. 10 May 22 Jul. 3
Days Mon. (5:00 pm – 8:00 pm)
Thu. (5:00 pm – 8:00 pm)
36 Hours (6 weeks)

Corrosion Engineering

Course Content Who will benefit Schedule
  • Physical properties
  • Film tests
  • Optical properties
  • Mechanical properties
  • Environmental resistance
  • Special tests
  • Instrumental analysis
  • Destructive tests
  • Non-destructive tests

The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, engineers and technicians, mechanical, civil and chemical engineers.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter

Date Feb.27 Apr. 10 May 22 Jul. 3
Days Mon. (5:30 pm – 9:30 pm)
Thu. (5:30 pm – 9:00 pm)
30 Hours (4 weeks)

Coating Technology

Course Content Who will benefit Schedule
  • Basic concepts in coatings
  • Resins
  • Pigments
  • Solvents
  • Additives
  • Types of coatings
  • Coating Manufacturing
  • Fundamental of coating formulation
The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, environmental engineers, technicians, and scientists.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter
Date Feb.28 Apr. 11 May 23 Jul. 4
Days Tue. (5:30 pm – 9:30 pm)
Thu. (5:30 pm – 9:00 pm)
30 Hours (4 weeks)

Physics and Chemistry of Paints and Coatings

Course Content Who will benefit Schedule
  • Rheology
  • Film Formation
  • Mechanical Properties
  • Dispersion
  • Particle size
  • Exterior Durability
  • Adhesion
  • Corrosion protection
  • Solventborne coatings
  • Waterborne coatings
  • High solid coatings
  • Powder coatings
The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, environmental engineers, technicians, and scientists.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter
Date Feb.27 Apr. 10 May 22 Jul. 3
Days Mon. (5:00 pm – 8:00 pm)
Thu. (5:00 pm – 8:00 pm)
36 Hours (6 weeks)

Automotive Coatings

Course Content Who will benefit Schedule
  • Pretreatment
  • Electrocoating
  • Primer coat
  • Topcoat
  • Quality Control
  • Coatings for plastic parts
The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, engineers and technicians, mechanical, civil and chemical engineers.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter
Date Mar. 11 Apr. 8 May 6 Jun. 3
Days Sat. (10:00 am – 4:00 pm)
18 Hours (3 weeks)

Coating Inspection

Course Content Who will benefit Schedule
  • Introduction
  • Corrosion and Corrosion Control
  • Coatings
  • Coating Specification
  • Inspection procedures
  • Documentation
  • Surface Preparation
  • Coating application by brush and roller
  • Coating application by conventional spray and airless spray
  • Non-destructive tests
  • Destructive tests
The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, environmental engineers, technicians, and scientists.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter
Date Feb. 28 Apr. 11 May 23 Jul. 4
Days Tue. (5:30 pm – 9:30 pm)
Thu. (5:30 pm – 9:00 pm)
30 Hours (4 weeks)

Powder Coatings

Course Content Who will benefit Schedule
  • Powder coatings fundamentals
  • Powder coatings application
  • Quality Control
The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, engineers and technicians, mechanical, civil and chemical engineers.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter
Date Apr. 1 Apr. 29 May 27 Jun. 24
Days Sat. (10:00 am – 4:00 pm)
18 Hours (3 weeks)

Coating Defects and Failure Analysis

Course Content Who will benefit Schedule
  • Common failure modes
  • Application-related problems
  • Example of failures
  • Physical methods
  • Failure repair
  • Field methods
  • Physical methods
The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, environmental engineers, technicians, and scientists.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter
Date Mar. 4 Apr. 29 Jun. 3 Jul. 8
Days Sat. (10:00 am – 4:00 pm)
Sun. (10:00 am – 4:00 pm)
12 Hours (1 week)

Surface Preparation and Coating Application

Course Content Who will benefit Schedule
  • Surface Preparation
  • SSPC standards
  • Surface Preparation for concrete coating
  • Methods of application
  • Brush and roller application
  • Conventional and airless spray application
The course provides substantial technical details and it is designed for technical personnel, all engineering disciplines, consulting and engineering staff, environmental engineers, technicians, and scientists.
Course offers:
1) Theory/common practice
2) plant tour (if applicable)
3) Software
3) hands-on industrial project
4) prevalent codes/standards (if applicable)
5) final project evaluation by a panel of experts
6) providing reference letter
Date Mar. 11 May 6 Jun. 10 Jul. 8
Days Sat. (10:00 am – 4:00 pm)
Sun. (10:00 am – 4:00 pm)
12 Hours (1 week)